How to remove “VIRUS ALERT FROM MICROSOFT” pop-up

Pop-ups “VIRUS ALERT FROM MICROSOFT” is a social engineering attack that causes the browser to display in full extent and display pop-up messages that will not disappear, basically blocking the browser. These error messages, which are a false intention to fool you by calling the help hotline which is being signaled. If you call these scammers, they may provide false solutions to your “problems” and request payment in the form of a one-time subscription or payment for the alleged service.

Image for post
Image for post

All these “VIRUS ALERT FROM MICROSOFT” alarms are nothing more than a scam. Don’t call the number on the pop-up windows. Microsoft warnings and error messages never include a contact number.
Microsoft does not send unsolicited email or make unsolicited phone calls to obtain financial or personal information or to repair your computer. All unwanted phone calls or pop-ups without a doubt. Do not provide any personal data.
Photo: WIRUS ALERT FROM MICROSOFT — Service fraud

Your browser may be redirected to websites that contain fake “VIRUS ALERT FROM MICROSOFT” error messages by malicious ads on the displayed sites or advertising software. This guide was created to help Windows users eliminate malware on their own device. If you’re just looking for a way to block the “VIRUS ALERT FROM MICROSOFT” redirect to a specific webpage, you can use a free browser extension, such as Adblock.
These programs are packaged with free applications that you download from the web when it comes to adware. Some free downloads do not reveal that your applications will be installed, and you may also find that you have advertising software installed.

Fake “VIRUS ALERT FROM MICROSOFT” error messages are disclosed in such a way as to deceive the consumer into believing that the computer has crashed or a virus has been detected on the computer. The user tries to scare by calling between numbers to get support. In fact, however, they will be welcomed by people who are currently trying to sell them unnecessary solutions and support contracts.

Fake “VIRUS ALERT FROM MICROSOFT” error messages will receive the following message:

VIRUS ALERT FROM MICROSOFT
This computer is BLOCKED
Do not close this window and then restart your computer
The registration key of your computer will be locked.
Why did we block your computer?
The registration key in the window is prohibited.
This window uses pirated software.
This window is currently sending the virus to the network.
This window is hacked or used on an unspecified site.
We are disturbing this computer for our own safety.
Contact the Microsoft Hotline to reactivate your computer.

Windows support alert
Your own system has detected unusual activity.
This can damage your computer data and monitor your financial activities.
Report this action to

The scammer will try to force the victim to gain access. After gaining remote access, the scammer depends on optimization tips, usually including tools embedded in Windows and other applications, so as to obtain the victim’s confidence in alleged “support” solutions when the scammer actually takes care of the victim’s credit card account details.

You should not buy anything from the numbers registered in such alarms “ALERT VIRUS FROM MICROSOFT”. Because it’s not Microsoft, but a waiting group robs you of countless dollars below a fake 36, no matter what you do, don’t call the phone number. Call your credit card provider to undo payments once you’ve paid.
The instructions below are for Windows users, but we have a Guide for Android with a Guide for Mac that should help organize your device.
A way to eliminate the “VIRUS ALERT FROM MICROSOFT” pop-up (Virus Removal Guide)

This malware removal instruction may seem overwhelming due to the amount of action taken and the many programs used. We’ve written it to offer comprehensive, clear and easy-to-understand instructions that anyone can use to eliminate malware at no cost.
Complete all steps in the correct order. If you have any questions or concerns at a certain stage, STOP and ask for help.
To eliminate the “VIRUS ALERT FROM MICROSOFT” pop-ups, follow these steps:
STEP 1: Uninstall malware from Windows
STEP 2: Use Malwarebytes to eliminate “VIRUS ALERT FROM MICROSOFT” adware
STEP 3: Use HitmanPro to scan for malware and unwanted programs
STEP 4: Double check for malware using AdwCleaner
STEP 5: Reset your browser settings to eliminate “VIRUS ALERT FROM MICROSOFT” pop-ups
This step is required if the microsoft edge pop up virus warning do not allow you to close your browser.

Open Task Manager by right-clicking the taskbar and then clicking Run Task Manager. Instead of starting Windows Task Manager, you can press Ctrl + Alt + Del and click Task Manager or simply press Ctrl + Shift + Esc.
Scroll through the list until you see the web browser procedure and left click on it to highlight it. After selecting the browser process, click Finish task as shown in the image below.
The browser window should be closed. The next time you open your browser, do not allow the browser to open the last page.
STEP 1: Uninstall malware from Windows
At this stage, eliminate and we will try to identify.

Go to “Programs and characteristics”.

Windows 10
Windows 8
Windows 7
In the Start menu, type Control Panel from the search box and then select “Control Panel” in the results.
After opening the “Control Panel” window, click “Uninstall Software” in the “Programs” class.
Find the malicious program and then uninstall it.

The “Programs and Features” screen will be displayed listing all the applications installed on your computer. Scroll through the list until you find the malicious application, then click to highlight it, and then click the “Uninstall” button that appears on the top toolbar.

Known malicious applications: YeaDesktop, Wajam, 1.0.0.1, DNS Unlocker, Cinema Plus, Price Minus, SalesPlus, New Player, MediaVideosPlayers, Browsers_Apps_Pro, PriceLEess, Pic Enhance, Sm23mS, Salus, Network system driver, SS8, Save daily prices, Word Proser, Desktop Temperature Monitor, CloudScout Parental Control, Savefier, Savepass, HostSecurePlugin, CheckMeUp or HD-V2.2.

The malicious application may have a different title on your computer. If you can’t locate the malware on your computer, you can still use STEP 2.
Follow the instructions on the screen to uninstall the application.

In another message box, confirm the uninstallation procedure by clicking Yes, follow the instructions to uninstall the application.

Make sure you read all the hints because you trust you won’t see 26, some programs that are malicious attempts to sneak out.

If you have problems while trying to uninstall a program, you can use Revo Uninstaller Free to completely get rid of the unwanted program from your computer.
STEP 2: Use Malwarebytes to eliminate “VIRUS ALERT FROM MICROSOFT” adware
Malwarebytes is one of the most used and hottest programs for many reasons and for Windows. It is able to destroy all sorts of malware that applications will overlook without destroying anything. Malwarebytes has been released when it comes to cleaning the infected device and we urge them.

For the first time you are getting a trial version of this premium edition, including protection against ransomware and tools such as scanning. After fourteen days, it returns to the standard version, which detects and removes malware infections after running the scan. It is very important to remember that Malwarebytes will work without conflicts with applications.

Download Malwarebytes.

It is possible to download Malwarebytes by clicking the hyperlink below.

LINK TO DOWNLOAD MALWAREBYTES
(The link above will open a new page from Where You Able to download Malwarebytes)
Double-click the Malwarebytes installment document.

After the Malwarebytes download is complete, double-click the mb3-setup-Consumer-x.x.x.xxxx.exe document to configure Malwarebytes on your computer. Usually, downloaded files are stored in the Downloads folder.

A User Account Control pop-up may appear asking you if you want to allow Malwarebytes to make modifications to your device. If this happens, you must click “Yes” to continue the configuration.

Follow the instructions on the screen to configure Malwarebytes.

After running the Malwarebytes installation, you will see that the Malwarebytes Installation Wizard will guide you through the installation procedure. To install Malwarebytes on your computer, click “I Agree and Install”.

Click “Scan now”.

Once configured, Malwarebytes will update and launch the database. To perform a system scan, click “Scan Today”.

Wait for completion.

Malwarebytes will start scanning your computer. This procedure sometimes takes a few minutes, so we recommend that you check it from time to time and do something else.

Click “Quarantine selected”.

A screen will be displayed showing the infections detected by Malwarebytes after the scan. To eliminate the malicious applications detected by Malwarebytes, click the “Quarantine selected” button.

Restart your computer.

Malwarebytes will eliminate registry keys and all detected files. Malwarebytes may ask you to restart your computer to complete the removal procedure.

After the malware removal process is complete, you can close Malwarebytes and follow the remaining instructions.

STEP 3: Use HitmanPro to scan for malware and unwanted programs
HitmanPro is another opinion scanner that uses a strategy characteristic of scanning for malware. HitmanPro scans the behavior of active documents and files in areas where malware resides. HitmanPro sends it for scanning via 2 antivirus engines, which can be Kaspersky and Bitdefender if it finds a document that is not understood.

Although HitmanPro is shareware and costs $ 24.95 for 1 year on 1 computer, scanning is not really limited. The restriction only appears if there is a need to eliminate or quarantine malware from HitmanPro, and until then you can run a 30-day trial version once to allow cleaning.

Download HitmanPro.

It is possible to download HitmanPro by clicking the hyperlink below.

DOWNLOAD LINK HITMANPRO
(The above link will open a new website from which you can download HitmanPro)
Install HitmanPro.

After the HitmanPro download is complete, double-click “hitmanpro.exe” (e.g., 32-bit versions of Windows) or even “hitmanpro_x64.” Exe “(for 64-bit versions of Windows) to configure this application on your computer. Usually, downloaded files are stored in the Downloads folder.

A User Account Control pop-up window may appear asking you if you want to allow HitmanPro to modify the device. If this happens, you must click “Yes” to continue the configuration.

Follow the hints.

After starting HitmanPro, the initial screen will be displayed as shown below. Click ‘Next’ to perform a system scan.

Wait for completion.

HitmanPro will start scanning your computer. This procedure will take a few minutes.

Click Next “.

After scanning by HitmanPro it will display a list of all malicious programs detected by the program. Click “Next” to eliminate the malicious applications.

Click “Activate Free Permission.”

Click “Activate Free Permission” to start the free 30-day trial and remove all malicious files from your computer.

After completing the procedure, you can close HitmanPro and stick to the remaining instructions.

STEP 4: Double check for malware using AdwCleaner
AdwCleaner is a popular scanner that can detect and remove malware that the most-known anti-virus program and applications cannot find.
Although the HitmanPro and Malwarebytes scans are much more than enough, we recommend AdwCleaner to customers who just want to make sure that their computer is 100% clean or have similar problems.

Download AdwCleaner.

It is possible to download AdwCleaner by clicking the hyperlink below.

ADWCLEANER DOWNLOAD LINK
(The above link will open a new website from which you can download AdwCleaner)
Double-click the installation file.

Double-click the document called “adwcleaner_7.x.x .xe.” To start AdwCleaner. Usually, downloaded files are stored in the Downloads folder.

The User Account Control dialog box may appear asking if you want to run this document. If this happens, you must click “Yes” to continue the configuration.

Click “Scan now”.

After starting AdwCleaner, click “Scan today” to perform a system scan.

Wait for completion.

AdwCleaner will scan your computer. This procedure sometimes takes a few minutes.

Click “Clean and Repair”.

It will list all malicious programs that the application has found after the end of AdwCleaner. Click “Clean and Repair” to remove malicious files from your device.

Click “Clear and restart today”

AdwCleaner may want to restart the device after the removal process. Click “Clear and restart today” to complete the elimination procedure.

STEP 5: Change browser settings to eliminate “VIRUS ALERT FROM MICROSOFT” pop-ups
We will need to reset your web browser settings If you are redirecting your computer to the VIRUS ALERT FROM MICROSOFT website. This step should be taken if the last measures did not solve your problems.

Google Chrome
Mozilla Firefox
Internet Explorer
Microsoft Edge
To eliminate false “VIRUS ALERT FROM MICROSOFT” error messages from Google Chrome, we need to reset the browser to its default settings. Changes made by the application installation will be reset by resetting your browser preferences. Your saved passwords and bookmarks will not be deleted or changed.
Open the Chrome “Settings” menu.

Click the Chrome menu represented by three lines. When the drop-down menu appears, select “Settings.”

Click “Advanced” at the bottom.

Chrome “settings” should appear in a new window or tab, depending on the configuration. Then scroll to the bottom of the page and click on the “Advanced” connection (as shown in the example below).

In the “Reset” section, click “Reset”.

Complex chrome settings should be displayed. Scroll down until you see the “Reset and organize” segment as shown in the example below. Then click “Reset Settings to Initial Values”.

Confirm by clicking “Reset”.

A confirmation dialog should appear, detailing the items that will be restored if you continue the procedure that has been reset. To complete the recovery process, click “Reset Settings”.

Your computer should now be free of fake “VIRUS ALERT FROM MICROSOFT” error messages. If you continue to have problems while trying to eliminate the fake “VIRUS ALERT FROM MICROSOFT” error messages from your computer, do one of the following:

Written by

I am Yehana Mccoy and I am living in the United States. If any issue occurs contact us and get quickly full support.

Get the Medium app

A button that says 'Download on the App Store', and if clicked it will lead you to the iOS App store
A button that says 'Get it on, Google Play', and if clicked it will lead you to the Google Play store